Memtec PVC Metal Drip Edge Trims - All sizes
Manufacturer/Brand: Memtec Ltd
SKU:2036
9991 in stock
Couldn't load pickup availability
The Memtec PVC Single Ply Metal Drip Edge Trims are preformed perimeter edges that complete the installation of your Memtec PVC Single Roof System.
Each Drip Trim is fabricated from a flat sheet of metal that has a PVC coating on one side. This allows for the Memtec Single Ply Membrane to be directly Hot Air Welded to the Drip Trims. The PVC Coating is the same colour as the membrane itself, RAL 7012.
These drip trims are for use at the perimeter edges of your Memtec single ply PVC roofing Installation. These allow for any water on the roof area to run over the edge of the roof into your guttering system below.
Each Drip Trim is 2m in Length. We offer three standard sizes from stock. Each trim is the same apart from the depth of the drip face. We can also offer a bespoke fabricated option as well. In order to obtain a price for the bespoke service, we kindly request that you contact us directly with measurements and quantity.
We offer a full range of other Metal trims to complete your Memtec Roof Installation. Verge Water Check Drip trims, Wall Chase Trim, Internal & External Angles, Wall Counter Flashing and Flat metal coated Sheets that you can have Fabricated Yourself.
We also offer a full range of Insulation Products to go with the Memtec product range - contact us for more information.
Important Information
To successfully install Memtec PVC Single Ply Membranes, extensive training and on-site guidance for a minimum of 12 months, along with costly specialized tools, are prerequisites. This product is not suitable for DIY enthusiasts or roofing/building contractors lacking adequate experience. Any errors stemming from inexperienced installation can nullify product warranties.
Images are representative only - colour and shading can vary in images and screen resolution. The RAL Colour Reference is RAL 7012 and Free Samples, and Information Packs can be Requested prior to Purchasing.
Additional Information for Memtec PVC Metal Drip Edge Trims - All sizes
Technical Information
Delivery Information
Delivery Information
The Memtec Single Ply Range is delivered directly to your chosen location by our network courier partners typically with in 2 - 4 working days.
Deliveries will be completed on a variety of large HGV vehicles which may include Extra Large Articulated HGV Vehicles. Please consider any restrictions close to your location that may impede or stop your delivery from taking place. Please notify us in advance of any restrictions that you feel could be an issue to avoid any potential delays or additional charges being applied. The rolls will be placed on timber pallets and offloaded by a pallet truck and tail lift to the roadside only. We strongly recommend refraining from booking, scheduling, or commencing any works until you've received your complete materials order. Your satisfaction and seamless project execution are our top priorities.
FAQ's
Please Note: Installation should only be attempted by suitably trained personnel.
If you are unsure and require further help or assistance, then please do contact us for further information.
Membrane Benefits & Features
A complete range of Memtec Roofing and Waterproofing Single Ply PVC Membranes to suit any most any flat roof type, including accessories Suitable for flat roof applications of all sizes.
- 20 year Product Guarantee.
- BBA Certificate. Number: 14/5144.
- BBA confirmed life span in excess of 35 Years. UV Resistant.
- Self-extinguishing.
- Root Penetration resistant.
- Hot Air Welded Laps and Joints.
- Membranes are Mesh reinforced which provides dimensional stability.
- Vapour permeable. No Blisters or Bubbles. Low temperature pliability. Down to minus 25°C without cracks.
- Can be either Mechanically Fixed, Fully Bonded or Loose Laid and Ballasted.
- Lightweight and fast installation.
- Excellent Aesthetic appearance.