EcoFin Pro Reinforcement Matting Roll – 225g
Manufacturer/Brand: EcoFin Waterproofing
SKU:M20
In stock
Couldn't load pickup availability
EcoFin Pro Reinforcement Matting – 225g is a high-quality chopped strand fibreglass matting designed specifically for use with the EcoFin PU liquid waterproofing system. Available in 20m² (20m x 1m) or 60m² (60m x 1m) roll sizes, this matting plays a key role in reinforcing the waterproofing layer to enhance strength, flexibility, and long-term durability.
Easy to cut and apply, EcoFin FG matting is rolled directly into the first wet coat of EcoFin PU liquid membrane as part of a wet-on-wet application. Once embedded and covered with a second layer of liquid, the matting creates a seamless, reinforced waterproof barrier.
This versatile reinforcement is also ideal for strengthening vulnerable areas such as upstands, internal outlets, fissures, expansion joints, active cracks, and insulation joints.
Certified to the highest standards and BBA approved, EcoFin Reinforcement Matting is a crucial part of any professionally installed EcoFin PU system, helping to deliver a waterproofing solution with a life expectancy of over 25 years.
Key Features:
Weight: 225g.
Sizes Available:
- 20m x 1m (20m²).
- 60m x 1m (60m²).
Features & Uses:
- Use: Wet-on-wet reinforcement with EcoFin PU system
- Applications: Flat roofs, upstands, cracks, joints & detail areas
- Durability: Increases system strength and longevity
- Certification: BBA certified – life expectancy 25+ years
- Installation: Easily cut with scissors and embedded during application
An essential component for any long-lasting EcoFin waterproofing project. Let me know if you'd like a shortened version for marketplace listings too!

Additional Information for EcoFin Pro Reinforcement Matting Roll – 225g
Technical Information
Delivery Information
FAQ's
EcoFin Pro PU – Application Guide
Surface Prep
Make sure the surface is clean, dry, and in good condition.
Fix any cracks or gaps using a PU sealant.
All trims must be fitted before you begin.
Weather & Temperature
Only apply when the temperature is between 5°C and 35°C.
Mixing
Open the tin and stir thoroughly before use.
If left standing, stir again before reapplying.
Application Steps
Start with details and edges, then move on to flat areas.
Apply EcoFin as a wet-on-wet system:
First, apply a generous coat of EcoFin liquid.
Roll EcoFin Reinforcement Matting into the wet layer.
Apply more EcoFin liquid on top, making sure the matting is fully covered with no pinholes or bubbles.
Rain Protection
Once applied, the roof is watertight and resistant to rain.
Coverage
Approx. 8–10m² per 15kg drum (may vary depending on surface).
Final Check
After the membrane dries, inspect for any dry spots or pinholes and apply more liquid if needed.
Topcoat Application
Apply EcoFin Protect topcoat within 48 hours of the membrane drying for UV protection and long-term durability.
Need More Detail?
Refer to the full application sheet for specific guidance on different surfaces.